If an old well sits unused on your property, it should not be left open, loose, or forgotten. A buried casing, a weak cap, or a well that no longer serves the home can create a problem that keeps showing up until it is handled the right way.

That is where C & L Well & Pump Services comes in. We help Tallahassee property owners close out unused wells with careful well abandonment work that fits the site and the condition of the well. If you are ready to deal with an old well on a residential or commercial property, the next step is simple: call or text 850-570-9153 to talk through what is there and what needs to happen next.


When a well should be closed

Some wells are no longer part of the property’s water setup. Others were left behind after a pump change, a new water source, or a system update. If the well is not being used, it still deserves attention. An unused well can become a nuisance if the casing is exposed, the cover is loose, or water collects around the opening.

C & L Well & Pump Services handles well abandonment for Tallahassee properties that need a clear finish for an old water source. We help identify whether the well should be sealed and closed out, rather than left idle.

Common signs

  • Old well equipment remains on the property but is no longer serving a need
  • The well opening is visible, uncovered, or partially exposed
  • The casing shows wear, damage, or instability
  • A previous pump was removed and the well was never addressed afterward
  • There is uncertainty about whether the well is still active

What abandonment involves

Well abandonment is more than removing a cap and walking away. It is a careful process that closes the well so it is no longer left open to future problems. The exact work depends on the well’s condition, depth, and layout, along with what is already on the site.

We look at the well itself, the existing pump or hand pump setup, and any visible signs around the opening before we start. From there, the work is planned around sealing and closing the well with attention to the site around it.

Typical work steps

  1. Site review
    We assess the well location, visible components, and general condition before moving forward.
  2. Equipment removal
    If a pump, tank connection, or hand pump remains attached, it is removed as part of the process.
  3. Well sealing
    The well is closed using the approach suited to the well and site conditions.
  4. Final closing
    The opening is addressed so the area is left safer and easier to manage.

Why it matters

An unused well can be more than a leftover feature. It can become a point of concern for a homeowner, a buyer, or anyone using the property. A well that remains open or only partly addressed can invite unwanted attention because it was never finished the right way.

For many property owners, abandonment is also about removing uncertainty. Once the well is closed, there is one less item to worry about on the property. That can matter when preparing land for future use, managing an older water setup, or dealing with a well that has been out of service for a long time.


Signs to watch

If you are not sure whether a well needs abandonment work, the site itself often gives clues. The opening may be obvious, but other signs can be less direct. A well that once supported a pump system may still have visible parts even after the main water use stopped.

Watch for these clues

  • Old piping or fittings near the well location
  • A capped well that no longer connects to active equipment
  • Unused hand pump hardware on the property
  • Open space where a former tank or pump was removed
  • Questions from buyers, tenants, or family members about an old well on site

If any of these sound familiar, it is worth having the well looked at before it becomes a bigger project later.


How we help

C & L Well & Pump Services works with residential and commercial customers across Tallahassee and nearby areas of Leon, Jefferson, Wakulla, and Gadsden Counties. Well abandonment is part of the broader water well and pump work we handle, so the site is approached with an understanding of how the old well fits into the rest of the system.

We also service related well equipment, including water pumps, water tanks, and stainless steel deep well hand pumps. That matters when an abandoned well still has attached hardware that needs to be addressed before closure.

What we bring to the job

  • Well abandonment for old or unused wells
  • Removal of related pump or hand pump components
  • Attention to existing well and tank connections
  • Service for properties across Tallahassee and surrounding county areas

Property types we see

Old wells show up on many kinds of properties. Some were part of a past setup that is no longer needed. Others were left after a change in water source or after equipment was removed. Each site is different, and the well itself may have been unused for years before anyone noticed it again.

We work with property owners who need the well closed out for a cleaner, more manageable site. Whether the well is on a home lot, a rural parcel, or a commercial property, the goal is the same: remove the unused opening from the list of concerns.


Before we start

A little information goes a long way before the work begins. If you can share what you know about the well, it helps us understand the situation and plan the job more smoothly. Even partial details are useful if the well has been forgotten for a long time.

Helpful details

  1. Location on the property
    Tell us where the well is located and whether it is easy to access.
  2. Visible equipment
    Let us know if a pump, tank line, or hand pump is still present.
  3. Current use
    Explain whether the well is still being used or has been out of service.
  4. Site concerns
    Mention any exposed casing, loose covering, or other visible problems.

You can call or text 850-570-9153 to share what you see and start the process.


Common questions

What is well abandonment?

It is the process of closing an unused well so it is no longer left open or inactive on the property.

Does a well need to be removed if it is no longer used?

If a well is no longer part of the property’s water setup, it should be addressed rather than left as-is.

Can you handle old pump equipment too?

Yes. If the abandoned well still has a pump, tank connection, or hand pump parts attached, we can deal with that during the job.

What kinds of wells do you work on?

We handle wells tied to residential and commercial properties, including older setups with visible casing or unused hardware.

Do you work outside Tallahassee?

Yes. We serve nearby areas across Leon County, Jefferson County, Wakulla County, and Gadsden County, along with surrounding towns such as Quincy, Crawfordville, St. Marks, Monticello, and Havana.

How do I get started?

Call or text 850-570-9153 and tell us what you know about the well. We will help determine the next step for your property.


Finish the job right

An old well should not sit open or forgotten when it can be closed out with care. If you need well abandonment for a property in Tallahassee, C & L Well & Pump Services is ready to help you move it from a lingering concern to a finished project.

When you are ready, reach out at 850-570-9153. We will help you take the next step toward closing the well and clearing the site.

Clean finished well service area with open space for text.

Get Help Today

Schedule Well or Pump Service

Call or text us to discuss your water well, pump, tank, or hand pump needs. We help customers throughout Tallahassee and the surrounding North Florida area.